Fein MM 700-1.7 Serie Mode D'emploi page 15

Mounting application tools
(MM 700-1.7Q (**)) (figure 4).
Release the clamping lever and tilt it to the
stop.
Pull out the fastening element.
Clean the tool holder, the application tool and
the fastening element.
Insert the application tool accurately into the
star-shaped tool holder. Pay attention that the
application tool is mounted flush.
Fig. 4
2.
Clamping lever
1.
3.
4.
1.
2.
Fastening element
180°
Cover
180°
When changing application
CAUTION
tools with sharp cutting
edges, use cover 3 21 74 011 00 0 to protect
yourself against hand/arm injuries.
Firmly press in the fastening
CAUTION
element to the stop. Then lock
the clamping lever.
Do not actuate the clamping
CAUTION
lever while the power tool is
running. Otherwise there is danger of injury.
4.
3.
5.
180°
6.
5.
8.
180°
7.
en
Fastening element
Application tool
Fastening element
Application tool
Cover
15