QSC WL 2102 Manuel De L'utilisateur page 8

Large Array Frame (continued)
The mounting plate and link on are located on the bottom side of the frame assembly. Use this link for attaching the rear of the first
enclosure. The grid allows for up or down angle options for use with either stacking or flying. The 4° "normal" locations on the link sys-
tem will yield a net 0° vertical inclination.
Use 4° link location for
0° vertical inclination
EN
Small Array Frame (Stacking Grid)
Do not fly (suspend) more than eight (8) enclosures form the small array frame.
Do not stack more than four (4) enclosures on a small array frame.
Use only 5/16" diameter x 1.25" long ball-lock pins on front receiver tubes.
The small frame will easily handle four enclosures and will interface with the QSC 215PCM or 215SB subwoofer in both a stacked or
flown configuration. The stacking bumpers on the frame may need to be moved to the opposite side of the frame member for use. The
small frame is constructed using standard "L" track for rigging.
8
All manuals and user guides at all-guides.com