Accessories - QSC WL 2102 Manuel De L'utilisateur

Preliminary System Specifications (subject to change without notice)
Configuration:
Frequency Response:
Sensitivity:
Nominal coverage:
Nominal Impedance:
EN
Transducers:
Low Frequency:
High Frequency:
Recommended Amplifier Power:
Enclosure:
Type:
Material:
Finish:
Grille:
Connectors:
Attachment points:
Weight:
Dimensions:

Accessories

Array Frames:
Software
Ball-lock Pins
10
All manuals and user guides at all-guides.com
Three way, biamp (active two way) or triamp (full three way active)
52Hz - 18KHz (+/- 3dB)
biamp: 97dB (2.83v @ 1m)
triamp: 99dB (2.83v @ 1m)
Horizontal:140deg.
8 ohms, low frequency in biamp mode, 16 ohms low frequency in triamp mode
16 ohms, high frequency
two 10" (254mm) long excursion, high power, 3" (76mm) voice coil, 16 ohm, 380
watts rms each
3.0" (76mm) diaphragm, 1.4" (36mm) exit, 16 ohm neodymium compression
driver on proprietary patent-pending waveguide, 80 watts rms
300 watts high frequency
700 watts mid frequency triamp mode
700 watts low frequency triamp mode
1400 watts low/mid frequency in biamp mode
Bass reflex (ported), trapezoidal
Cored Composite laminate
Black or white texture coat
Powder-coated steel
two Neutrik NL8
Self contained rigging configuration. Each front receiver tubes contains a
captive articulated joint (knuckle) and two ball-lock pins on lanyards. Rear
mounting block has integral mounting link and one ball-lock pin on lanyard.
70lbs, 31.8kg
10.75" H x 27.5"W x 20.25"D
27.3cm H x 69.85cm W x 51.43cm D
Small array frame- 8 enclosure maximum for flown (suspended) applications,
4 enclosure max. for stacking on I-215 sub cabinet (deck applications).
Frame weight 33lbs. / 15.0kg
Large Array Frame- 24 enclosure maximum for flown (suspended) applications, 12
enclosure max. for deck stacking.
Frame weight 84lbs. / 38.1kg
EASE Focus line array modeling software tool available; visit www.qscaudio.com or
contact QSC's Technical Services for DSP files for both QSControl.net and Signal
Manager
5/16" dia. x 0.75" long, t-handle: p-n SR000052-00
5/16" dia. x 1.25" long, button-handle: p-n SR000081-00
Vertical: Dependant on number of elements used