Connecting / Disconnecting - Panasonic UT-VEB5005WU Instructions D'utilisation

Connecting / Disconnecting

„ Preventing from falling down
The devices may fall down during installation or in use. Be
sure to take safety measures to prevent fall of the devices.
The followings are described to reduce the risk of injury resulted from fall of the
devices. It is not guaranteed that these measures are effective in all cases.
① Fix the mount adaptor to the cradle securely. ( è page 6)
② Fix the VESA-compatible device to the cradle.
Pass a wire (commercially sold) etc. through the Security Lock of the cradle,
and fix the VESA-compatible device in the shortest distance.
(20 cm or less of the distance is recommended to fix.)
③ Fix the VESA-compatible device to the computer.
Pass a wire (commercially sold) etc. through the Security Hook of the com-
puter, and fix the VESA-compatible device in the shortest distance.
(30 cm or less of the distance is recommended to fix.)
„ Connecting
1. Mount the mounting adaptor plate to the cradle.
Preparation: Place the cradle face-down.
① Remove 2 screws from the cradle stand and remove the stand.
E
5