Attaching To The Camera; Connecting A Microphone - Panasonic LUMIX DMW-XLR1 Manuel D'utilisation

Attaching to the Camera

Confirm that the camera is off. Attaching or removing the
XLR microphone adaptor while the camera is on may result
in malfunction.
1
Slide the lock lever in
the direction opposite to
that indicated by the
[LOCK 1] icon (1).
2
Slide the XLR
microphone adaptor into
the hot shoe until it
clicks securely into place
(2).
3
Slide the lock lever to the
[LOCK 1] position (3).
• To remove the XLR microphone adaptor, slide the lock
lever in the direction opposite to the [LOCK 1] arrow and
slide it from the hot shoe.
6
DVQX1208 (ENG)

Connecting a microphone

Insert the microphone
cable plug into the XLR
terminal of the unit.
• To prevent unnecessary force

• If there is only one cable to be connected, connect it to
• Use a shielded XLR microphone cable with a XLR (3 pin)
• The microphone cable can be

• The orientation of the cable holder

• Keep the cable holder out of
being applied to the digital
camera hot shoe, insert the
plug while holding the unit with your hand.
terminal [INPUT1].
terminal.
attached to the unit's cable holder.
can be changed. Remove the
cable holder and attach it in a
different orientation.
reach of children to prevent
swallowing.