Using The Jabra Bt800 With The Jabra A210 Bluetooth Adapter; Choosing Wearing Preference; Troubleshooting And Frequently Asked Questions - Jabra BT800 Mode D'emploi

NOTE: The ringing tone has been specified to be heard clearly yet comfortably when
you are wearing the headset.
Adjust light
•
You can decide if you want the LED in the mute button at the centre of the jog
wheel, to flash or not. When activated, the LED will flash every second during a
conversation or every three seconds when the headset is in standby mode.
Bluetooth connections
•
Choose "list" to scroll through the list of your paired devices and select the one
you want to make active.
•
You can also "add new device" from the menu. The functionality is the same as
setting the headset in pairing mode from the pairing stylus switch
5
Using the Jabra BT800 with the Jabra A210 Bluetooth adaptor
If you use your headset together with a Jabra A210 Bluetooth adapter, you will be limited
to using the headset's basic features.These features are answer/end call, using the voice-
dial function (if supported by the phone) and the mute. Caller ID, phonebook and putting
call on hold are not supported through the headset jack in the mobile phone.
To Pair the Jabra BT800 with the Jabra A210
The pairing process is a little different:
•
First set your Jabra BT800 in pairing mode and then the adapter
•
Place them close together. You do not have to enter a dedicated pin code for
pairing the two Jabra products, as you do with a mobile phone
Consult the A210 user manual for further information.
Making/answering a call when using the Jabra A210
•
When you make a call from your mobile phone, the call will be automatically
transferred to the headset (if it is on)
•
You can answer a call on your headset or your mobile phone. If your headset is in
standby mode, the call will be transferred immediately to the headset with a tap
on the headset's answer/end button
8
6
The Jabra BT800 is ready to wear
on the right ear. If you prefer the
left, gently rotate the earhook 180°.
See Fig 8.
For optimal performance, wear the
Jabra BT800 and your mobile
phone on the same side of your
body or within line of sight. In
general, you will get better
performance when there are
( )
no obstructions between the
headset and the mobile phone.
7
I do not have the full menu in my headset;
If you can hear crackling noises;
If you cannot hear anything in your headset;
Will the Jabra BT800 work with other Bluetooth equipment?

Choosing wearing preference

Troubleshooting and frequently asked questions

Some phones will not support all features available in your Jabra BT800. Check your
phone's user manual to ensure your phone supports the available features.
For the best audio quality, always wear your headset on the same side of the body
as your mobile phone.
1. Increase the volume on the headset
2. Ensure that the headset is paired with the phone
3. Make sure that the phone is connecting to the headset – if it does not connect
either from the phone's Bluetooth menu or by tapping the answer button, carry
out the pairing procedure
The Jabra BT800 is designed to work with Bluetooth mobile phones. It can also
work with other Bluetooth devices that are compliant with version 1.1 or 1.2 and
support headset and/or hands-free profile.
Fig. 8
9