Putting Out Of Operation And Storage - Haaga 475 Mode D'emploi

2
6.2 Transporting the sweeper in
a vehicle
CAUTION!
Damage to the sweeper due to improper
transport.
• Position the sweeper so that the bris-
tles of the disc brushes are not kinked
or bent.
• Secure the sweeper to prevent it from
tipping, slipping or being damaged.

7 Putting out of operation and storage

7.1 Removing the push handle:
475
Danger of injury!
• Avoid injury due to push handle acci-
dentally falling over.
NOTE
The push handle can be removed from the
sweeper to permit space-saving transport
in vehicles.
34
3
• Secure the sweeper with a suitable
lashing strap to prevent it from slip-
ping.
1. Remove the push handle
(see Removing the push handle).
2. Position the sweeper in the vehicle.
3. Secure the sweeper by means of a lash-
ing strap.
1. Swivel push handle upwards so that it
is vertical.
2. Press down the locking springs on the
inside using a screwdriver.
3. Pull out the push handle.