Haaga 475 Mode D'emploi page 35

Removing the push handle:
477 / 497
Danger of injury!
• Avoid injury due to push handle acci-
dentally falling over.
NOTE
The push handle can be removed from the
sweeper to permit space-saving transport
in vehicles.
1. Adjust so that the arrows (1) on the
housing are flush with the lugs on the
handle fittings.
2. Position yourself in front of the
sweeper inside the push handle.
3. Grasp both handle fittings with your
hands.
4. Carefully press both handle fittings
outwards.
5. Simultaneously pull the handle fittings
out of the two mounts on the sweeper.
7.2 Storing the sweeper
CAUTION!
Damage to the sweeper due to improper
storage.
• Position the sweeper so that the bris-
tles are not kinked or bent.
• Secure the sweeper to prevent it from
tipping, slipping or being damaged.
• Do not store the sweeper outside or in
a damp place.
NOTE
• Empty the waste bin
(see Emptying the waste bin).
• When storing, ensure that the push
handle and sweeper are secured to pre-
vent them from falling over.
• Space-saving storage:
Store the sweeper in a hanging position
(ensure sufficient load capacity of the
suspension)
• Clean the sweeper
(see Cleaning the sweeper).
1
35