Maintenance And Care; Regular Maintenance - Haaga 475 Mode D'emploi

8 Maintenance and care

CAUTION!
Damage to the sweeper due to improper
maintenance.
• Carry out maintenance of the sweeper
regularly.
• Perform only the maintenance work
and repairs described in the instruc-
tions.
• Have all other work performed by a
qualified specialist dealer.
• Use only genuine Haaga spare parts.
Otherwise there is a risk of accidents or
damage to the sweeper.
• In the event of queries related to this,
please consult a specialist dealer.

8.1 Regular maintenance

8.1.1 Before the start of work
Check the condition of the sweeper.
Check to ensure that the push handle is
securely attached to the sweeper.
Check condition of waste bin and ensure
that it is securely attached.
Check the disc brushes and fine dirt
sweeping roller for stuck parts and
embedded dirt – bristles must move
freely.
Check the disc brushes and fine dirt
sweeping roller for wound-up threads
and string – remove if necessary.
36
Check height adjustment of the disc
brushes and adjust to the ground to be
swept.
Check sweeping pressure adjustment –
adjust to the ground to be swept.
Clean handles – they must be clean and
dry and free of oil and dirt.
Check the sweeper for damage, and con-
tact Service if necessary.
Check the height adjustment
(see Height adjustment).
8.1.2 After the end of work
477 / 497: clean the dust filter
(see Cleaning the dust filter).
Clean the sweeper (see Cleaning the
sweeper).
8.1.3 Every 8 hours of operation
Clean the brush drives
(see Cleaning the sweeper).
Recommendation: apply a thin coating
of Haaga genuine lubricant spray to the
brush drives (see Spraying the brush
drives with lubricant).
8.2 Cleaning the dust filter:
477 / 497
Danger of injury!
• Do not clean with compressed air.
1. Remove the waste bin.