Operation And Functions - Klarstein FINE DINESTY Mode D'emploi

OPERATION AND FUNCTIONS

The LED flashes 3 times when plugged in power supply. Then it flashes ":", prompting
you to input the cooking menu and time.
1. Auto reminder
When your preset cooking procedure have finished, the LED Display will show End and
three beeps sound will be heard to prompt you to take out food. If you do not press
Pause. Cancel button once or open the door, the beep will be sounded at an interval of
3 minutes.
2. Clock setting
Preset.Clock.Defrost button make it available for you to input current or preset time
when ":" flashes onto LED display after plugged in, or try to skip it over to continue if
unnecessary.
Example: to set 12:30
Steps
After power-up, the colon flashes
1
Hold Preset.Clock.Defrost button three seconds
2
Turn Auto Cooking/Time.Weight knob to set exact
3
hours.
Press Preset.Clock.Defrost button once again.
4
Turn Auto Cooking/Time.Weight knob to set exact
5
minutes.
Press Preset.Clock.Defrost button once again or wait
6
for 5 seconds, and the numbers will go steadily.
Display
:
0:00
12:00
12:00
12:30
EN
25