GB
Description of operation
The wet and dry vacuum cleaner is
equipped with a robust stainless steel
container for waste collection. The guiding
wheels and castors make the appliance
very easy to manoeuvre. The suction flow
is switched off by a float during wet vacu-
uming once the waste tank is full. In addi-
tion, the machine has a blower function
and a socket for the connection of a further
electrical appliance.
The following describes the function of the
operating parts.
Technical data
Wet and dry cleaner ...................PNTS 1500 B3
Mains voltage ......220-240 V~, 50/60 Hz
Power consumption of motor ........1500 W
Max. load on appliance socket
(Pmax.) .....................................2200 W
Power consumption of motor
+ max. load on appliance socket
(Psum.) ........................................ 3700 W
Safety class .......................................... I
Protection category........................... IPX4
Cable length.....................................6 m
Waste tank capacity (brutto) .............. 30 l
Weight (incl. all accessories) .. approx. 8,8 kg
Sound pressure level
(L
) ................ 77 dB(A), K
pA
Technical and visual modifications may
be carried out due to further development
without prior notice. All dimensions, infor-
mation and statements provided in these
Operating Instructions are therefore subject
to amendment. Legal claims which are
based on the Operating Instructions can
therefore not be recognised.
8
Safety information
Symbols used in the instruc-
tions
Symbols on the appliance
General notes on safety
= 3 dB(A)
pA
To avoid accidents and injuries:
•
•
Hazard symbols with in-
formation on prevention of
personal injury and property
damage.
Precaution symbol with information
on prevention of harm / damage.
Notice symbol with information on
how to handle the device properly.
Electrical machines must not be dis-
posed of with household refuse.
Switching between additional ap-
pliance + vacuum cleaner
Max. load on appliance socket
Device socket for power tools
Caution! When using power tools,
observe the following basic safety
measures for the prevention of
electric shocks and the risk of injury
and fire:
Children should only be allowed to use
the appliance under supervision.
Never leave a machine which is ready
for operation unattended at the work-
place.