14.4.8. The shot has not been saved.
•
The camera was switched off before the shot could be saved.
14.4.9. Shots on other memory cards are not
displayed.
•
The shots on memory cards from other cameras will only be
displayed if the other camera also uses the DCF memory sys-
tem.
14.4.10. The shots cannot be transferred to the
PC via the USB cable.
•
The camera is not switched on.
14.4.11. When the camera is connected to the
computer for the first time, no new
hardware is found.
•
The USB connection of the computer is deactivated in the
BIOS settings.
•
Enable the port in the computer's BIOS settings. Refer to the
PC manual if necessary.
62 of 66