Signature SRUS5000XAQUA Manuel D'utilisation page 55

Controlling the temperature
The default temperature for the refrigerator is set to
"•"(4°C) and the freezer to "•"(-18°C). If you want to
change the temperature, follow the instructions
below.
Caution! When you set a temperature, you set an
average temperature for the whole refrigerator
cabinet. Temperatures inside each compartment
may vary from the temperature values displayed on
the panel, depending on how much food you store
and where you place them. Ambient temperature
may also affect the actual temperature inside the
appliance.
1. Fridge
Press the "Mode" for 3s to unlock the panel. Press
"Fridge"to set fridge temperature between 2°C and
7°C as needed, and control panel will display
corresponding values according to the following
sequence with the light on.
After 3s, the light is off and temperature is set.
2. Freezer
Press the "Mode" for 3s to unlock the panel. Press
"Freezer"to set freezer temperature between -15°C
and -23°C as needed, and control panel will display
corresponding values according to the following
sequence with the light on.
(Max)
4
(Min)
7
-23°C (Max)
-18°C
(Min)
-15°C
-52-
(•)
(•)