Receiving And Inspecting The Equipment; Storage; Unpacking - Parker CDAS HL 050 Guide D'utilisation

2.7 Receiving and Inspecting the Equipment

The dryer is supplied in a sturdy wooden crate designed to be moved using a forklift truck or pallet truck. Refer to the technical specification for
packed weights and dimensions. On delivery of the equipment check the crate and its contents for damage. If there are any signs of damage to
the crate, or there are any parts missing please inform the delivery company immediately and contact your local Parker domnick hunter office.

2.7.1 Storage

The equipment should be stored, within the packing crate, in a clean dry environment. If the crate is stored in an area where the environmental
conditions fall outside of those specified in the technical specification, it should be moved to its final location (installation site) and left to stabilise
prior to unpacking. Failure to do this could cause condensing humidity and potential failure of the equipment.

2.7.2 Unpacking

Remove the lid (A) and then all four sides of the packing crate (B). Carefully move the dryer to its final location, using a forklift truck or pallet truck
(C).
A B C
10