Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1
2
3
4
5
Printed: 07.07.2013 | Doc-Nr: PUB / 5070806 / 000 / 00
Hilti TE 25 Rotary Hammer Drill
Symbols
Read the operating
Return waste material
instructions before use.
for recycling.
Do not use this product in any way other than
as directed by these operating instructions.
The respective regulations of your trade
association and the enclosed safet precau-
tions must be observed.
The operating instructions should always be
kept with the machine!
Technical data
Input power:
Voltage (versions):
Input current:
Frequency:
Weight as per EPTA-Procedure 01/2003:
Dimensions:
Speed under load:
Hammering under load:
Single impact energy:
Drill bits for concrete:
Recommended diameter range:
Drilling performace in medium-grade concrete: 16 mm dia. = 60 cm
TE-TX/T drill bit
TE-T-GB drill bit
TE-C-BK percussion core bit
Chuck type:
TE-C interchangeable chuck for TE-CX/C drill bits
Automatic cut-out brushes
Double insulation, class II, CENELEC EN 60745
Radio and T.V. interference suppression as per EN 55014
Slip clutch for protection against overloading and accidents
Dust-tight enclosure; permanent lubrication (maintenance free)
Variable speed control switch
Ajustable side handle with depth gauge
Typically the A-weighted nois levels of the tool are:
– sound pressure level:
– sound power level:
For the given sound power level as per EN 60745, the tolerance is 3 dB.
Wear ear protection!
Triaxial vibration value (vibration vector sum)
measured in accordance
with EN 60745-2-1 prAA: 2005
measured in accordance
with EN 60745-2-6 prAB: 2005
Uncertainty (K) for triaxial vibration value:
Right of technical modifications reserved
830 W
100 V 110 V 120 V 220 V 230 V 240 V
8.7 A 7.9 A 7.2 A 3.9 A 3.8 A 3.6 A
50–60 Hz
5.1 kg
440×100×220 mm
1
st
speed 0–310 r.p.m.
2
nd
speed 0–640 r.p.m.
0–3720 blows/min.
3.8 Joule
6–40 mm dia.
12–20 mm dia.
3
/min. = 300 mm/min.
6–32 mm dia.
40 mm dia.
50–90 mm dia.
TE-T
90 dB (A)
101 dB (A)
Drilling in metal, (a
)
h, D
Hammer drilling
in concrete, (a
)
15.5 m/s
h, HD
2.7 m/s
2
2
1.5 m/s
2
9
Publicité
Table des Matières
