Norcold N2000 Serie Mode D'emploi page 5

Use only parts supplied by the manufacturer.
Do not change or adjust anything on the appliance, unless the change is authorized by
the manufacturer or its representative.
When positioning the appliance, ensure the supply cord is not trapped or damaged.
If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified person in order to avoid a hazard.
The refrigerant is R600a and insulation blowing gases is cyclopentane, servicing and
disposal of appliance should be done by qualified person.
Do not use the drawer as a step or ladder.
The maximum load of the large shelf is 26lbs [12kg] and the maximum load of the small
shelf is 13lbs [6kg].
Incorrect installation, adjustment, change to, or maintenance of this refrigerator can
cause personal injury, property damage, or both. Have service and maintenance work
done by your dealer or by an authorized Norcold Service Center.
This appliance is designed for 12V DC supply voltage. Do not attempt to run the
refrigerator on any other voltage or means of supply.
Do not bypass or change the refrigerator's electrical components or features.
Do not spray liquids near electrical outlets, connections, or the refrigerator components.
Many liquids are electronically conductive and can cause a shock hazard, electrical shorts,
and in some cases fire.
The rear of the refrigerator has sharp edges and corners. To prevent cuts or abrasions
when working on the refrigerator, be careful and wear cut resistant gloves.
Build−up of dust on the condenser will reduce the performance of the appliance and
increase the risk of overheating of the cooling system. Have the condenser and cooling
fan cleaned by qualified service personnel if you suspect poor performance.
Never open or damage the refrigerant circuit of the cooling system at the back or on the
inside of your appliance. The cooling system is pressurized and contains flammable
substances.
Do not use electrical appliances in the appliance.
Do not store explosive substances such as aerosol cans with a flammable propellant in
this appliance.
Never expose the appliance to moisture and/or rain.
Keep ventilation openings, in the appliance enclosure or in the built−in structure, clear
of obstruction.
4