COMENDA Hi-Line HB Serie Instructions Pour L'utilisation Et L'entretien page 22

ENGLISH
2.9 REGENERATION CYCLE HF45-HB35
2.9.a FILLING THE SALT TANK
IMPORTANT
T
he tank is to be filled when alarm F4 appears on
the display.
First of all make sure that there is salt in the specific con-
tainer and proceed as follows:
1. Unscrew the cap of the salt tank and introduce coarse
kitchen salt.
2. Screw the plug back on all the way to make sure the
tank is sealed.
2.9.b RESIN REGENERATION OPERATIONS
(AUTOMATIC) (only for mod. " RA")
The resin is rinsed for a few seconds upon
every switch-on, and a MICROREGENERATION
cycle is then performed.
IMPORTANT
T
he MICROREGENERATION cycle takes place
in the background.
This could lengthen the cycle.
REGENERATION appears on the display
ATTENTION
For machines with RCD - HR-A partial regeneration can
only be activated with the tank level
20
Part 2: Reserved for Operator
2.9.c MANUAL REGENERATION OPERATIONS
(at the user's discretion)
With the machine ON, perform the following operations:
Touch the SCROLL key
Select the REGENERATION
function from the display
Touch the START key.
The REGENERATION phase
begins.
ATTENTION
A
t this point the dishwasher carries out all the necessary
operations automatically for a preset time, during which
the machine cannot be used.
At the end of the cycle, the ma-
chine switches off automatically
and the display reads OFF.
The machine is now ready for use.
ATTENTION
O
nly an authorised technician can program the
regeneration parameters.
START START
OFF