Princess 352712 Mode D'emploi page 9

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 24
Internal Tank Water Full Alarm Function
The inner water tank in the air-conditioner has one water level
safety switch that controls the water level. When the water level
reaches an anticipated height, the water full indicator lamp lights
up. Follow previous steps to drain the water.
INSTALLATION
The air-conditioner should be installed on a flat and stable
surface. Do not block the air outlet and allow at least 30cm
around the unit.
Socket wiring should be in accordance with the local electric
safety requirements.
Exhaust Hose Installation
Twist both ends of the hot-air exhaust hose(9) into the hose
connector window end(8) and the hose connector air conditioner
end(10).
Insert the hose connector air conditioned end(10) into the
openings at the back of the air conditioner.
Fix the hose connector window end(8) to the nearest windowsill.
Universal Window Kit Installation
Clean the window and window frame with soap or detergent and
make sure the entire window frame is dust and grease free.
Cut the Velcro to the dimensions of the window with scissors.
Attach the Velcro around the entire window. Note: don't stick the
Velcro onto the glass.
Attach the cloth to the Velcro tape. Start with the narrow part and
work from the center towards the rest of the Velcro tape, which is
attached on the window frame and around the window.
It may be useful to open the window while attaching the cloth.
Make sure to leave enough room in the corners so the cloth won't
get stuck in the window.
Open the window kit's zipper by about 50 centimeters.
Place the air conditioning hose in the opening of the cloth. After
that, close the zipper until the air condition hose is placed.
Instruction manual
EN
9

Publicité

Table des Matières
loading

Table des Matières