Princess 352712 Mode D'emploi page 11

The unit doesn't cool • The doors or
enough. windows are not
closed.
• There are heat
sources inside the
room.
• Hot air exhaust
hose is not
connected or
blocked.
• Temperature
setting is too high.
• Air inlet in
blocked.
Noisy. • The ground is not
level or not flat
enough.
• The sound comes
from the flowing
of the refrigerant
inside the air
conditioner.
E0 Code • Room
temperature
sensor failed.
• Make sure all the E1 Code
windows and
doors are closed.
• Remove the heat
sources if
E2 Code
possible.
• Connect or clean
the hot air
E3 Code
exhaust hose.
• Reset the
temperature.
E4 Code
• Clean the air inlet.
• Place unit on a
flat, level ground
THE PRODUCT OR EQUIPMENT CONTAINS
if possible.
FLUORINATED GREENHOUSE GAS.
Art.nr.
Coolant:
Quantity in kg:
• Replace room
Global Warming Potential:
temperature
sensor. CO2 Equivalent in tonnes:
Instruction manual
• Condenser • Replace
temperature condenser
sensor failed temperature
sensor.
• Water tray full • Take off rubber
when cooling stopper and
empty the water.
• Pipe temperature • Replace pipe
sensor failed. temperature
sensor.
• Water tank full • Please empty the
water tank.
352712
R290
0.24
3
0.0007
EN
11