SOLAC PD 7640 Mode D'emploi page 13

to perform this operation every time you want to use the scales; every user
can record his/her information making it more convenient to use the scales.
Fig. 3
1.- Press the SET button. The user number will come up on the screen and flash.
Press the "+" or "-" buttons until you reach your user number (P1, P2, P3 or
P4).
It you are using the system for the first time, select a free user number and
use the same number the next times you use the scales.
Confirm the selection by pressing SET.
2.- Use the "+" and "-" buttons to select your gender. Confirm the selection by
pressing SET.
3.- Enter your age with the "+" and "-" buttons. Confirm the selection by pressing
the SET button.
4.- Enter your height with the "+" and "-" buttons. Confirm the selection by
pressing the SET button.
• The data entered will blink before being recorded and they will be stored in
the memory for future measurements.
• The scales will switch off if no buttons are pressed for 10 seconds.
WEIGHING WITH BIA ANALYSIS
• To start the scales, tap the surface with your foot, or press any key.
• Wait until "0.0" is displayed on the screen.
• Stand on the scales whenever "0.0" appears on the screen. Stay standing on
the scales until your weight appears. During the weighing process, your feet
must be on the metallic lines.
• After displaying your weight, an "o" will move from left to right. The scales will
be carrying out the bio-magnetic impedance analysis, which will calculate your
body's fat and water percentage. Please wait and do not get off the scales.
• After completing the analysis, the screen will display the body water and fat
values, storing them in the user memory.
• Next, the screen will display an "o" moving from left to right, press the SET
button (You have 5 seconds to do so).
• A number will start to flash on the screen (1-5). Press + or - to select the desired
memory bank and press SET to confirm the selection. The memory banks that
can be selected correspond to the last weights obtained by the user who has
carried out the BIA analysis.
• The screen will display all data in your personal memory: weight, percentage
body water and fat.
• To assess the results, see the "Reference Tables" section.
• If you used a user number, the screen will show the information from the last
time you weighed yourself. This information will be displayed every time you
use your user number. You can always request the data for the five last times
you weighed yourself, as described in point 7 in this section.
• These scales turn off automatically after ten seconds without use.
Peso baño PD 7640 13
13
5/7/07, 16:06:13