Before Using Your Fridge; The Various Function And Possibilities; Information About New Generation Cooling Technology - Teka RBF 78720 SS Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

• Before using your
teaspoon of sodium bicarbonate. Then, rinse with clean water and dry. Return all parts
to the
fridge freezer
If your refrigerator includes a fan condenser
The condenser of your fridge is placed at the bottom
of cabinet. As a result of that, assemble the spacer
by fixing it to holes on the cover bottom panel and
turn 90° that's shown below figure for arranging the
distance between the refrigerator and the back wall at
where you place the fridge. You can move the fridge
towards the back wall until that point.
The distance between the appliance and back wall
must be a maximum of 75 mm.

Before Using your Fridge

• When using your fridge for the first time, or after transportation, keep it
in an upright position for at least 3 hours before plugging into the mains.
This allows efficient operation and prevents damage to the compressor.
• Your fridge may have a smell when it is operated for the first time. This is normal and
the smell will fade away when your fridge starts to cool.
PART - 2.

THE VARIOUS FUNCTION AND POSSIBILITIES

Information about New Generation Cooling Technology

Fridges with new-generation cooling technology have a different operating system to static
fridges. Other (static) fridges may experience a build up of ice in the
freezer compartment due to door openings and humidity in the food. In
such fridges, regular defrosting is required; the fridge must be switched
off, the frozen food moved to a suitable container and the ice which has
formed in the freezer compartment removed.
In fridges with new-generation cooling technology, a fan blows dry cold
air evenly throughout the fridge and freezer compartments. The cold air
cools your food evenly and uniformly, preventing humidity and ice build-up.
In the refrigerator compartment, air blown by the fan, located at the top
of the refrigerator compartment, is cooled while passing through the gap
behind the air duct. At the same time, the air is blown out through the
holes in the air duct, evenly spreading cool air throughout the refrigerator
compartment.
There is no air passage between the freezer and refrigerator compartments,
therefore preventing the mixing of odours.
As a result, your fridge, with new-generation cooling technology, provides
you with ease of use as well as a huge volume and aesthetic appearance.
fridge
freezer, wipe all parts with a solution of warm water and a
after cleaning.
EN -63-
Plastic for distance setting

Publicité

Table des Matières
loading

Table des Matières