Salda STOUCH Notice Technique page 8

DESCRIPTION OF ELEMENTS
B1 On/Off
B2 Fan speed selection
B3 Temperature selection
B4 Increase
ELEMENTS COOMAND
B1 L1
Switch on
B1 L1 Switch off
Activation from
L1
sleep mode
B2 B4 B6
Set fan speed
L2
B3 B4 B6
Set tempera-
L3 ture
Change value
B4 B6
of selected
L4-L7
setting
Switch on/off
B4 B5 B6
the intensive
L2 ventilation
(boost)
8 | EN
B5
B6
S1
L4-L7 Fan speed indications
ACTION INDICATION
Press down for 2
L1 lights on.
seconds B1
Press down for 2
L1 lights off.
seconds B1
Press any button. L1 flashes slowly in sleep mode.
L2 lights on. Speed is adjusted by touching
Touch B2.
elements B4 and B6
L3 lights on. Temperature is adjusted by
Touch B3.
touching elements B4 and B6
Increase by touch-
Numbers change in the segment display. L4,
ing B4, decrease
L5, L6, L7 shows selected fan speed.
by touching B6
L2 is blinking. Split screen shows remaining
time in seconds (if there're more than 600
sec. then - in minutes). Time can be adjusted
by pressing B4 and B5 (in time of processing
Press 2 secons
the function).
B5.
Maximal BOOST time: 300 minutes (5 hours).
Note: Time can't be adjusted on PRV con-
troller. If unlimited BOOST time is set on PRV
controller, then split screen shows "---".
Maximum fan speed for limited time (boost)
Decrease
Segment display
STOUCH v2019.1