Adjusting The Harness - Husqvarna 553RBX Manuel D'utilisation

H1158940-26,553RBX,GB.fm Page 15 Tuesday, June 13, 2017 8:08 AM
• Move the backplate to the desired height and fasten it.
Make sure the pin aligns with one of the holes on the
frame, see picture.

Adjusting the harness

• Put on the harness.
• Tighten the waist strap so that it sits securely.
• Tighten the chest strap.
• Adjust the chest strap vertically if needed and make
sure it fits well.
ASSEMBLY
• Adjust the shoulder straps to distribute the load evenly
across your shoulders.
• Loosen or tighten the waist strap so that approx. 70%
of the load is on your waist and 30% on your
shoulders.
–
English 15