About Your New Labelmaker; Getting Started - Dymo LabelManager 350 Guide D'utilisation

About Your New Labelmaker

With your new DYMO LabelManager 350 labelmaker,
you can create a wide variety of high-quality, self-
adhesive labels. You can choose to print your labels in
many different sizes and styles. The labelmaker uses
DYMO D1 label cassettes in widths of 1/4" (6 mm), 3/
8" (9 mm), 1/2" (12 mm), 3/4" (19 mm), or 1"
(24 mm). Label cassettes are also available in a wide
range of materials.
Visit www.dymo.com for information on obtaining
tapes and accessories for your labelmaker.
Warranty Registration
Please complete the warranty registration card and
return it to the appropriate customer service address
within seven days of purchase. Visit www.dymo.com
for details.

Getting Started

Follow the instructions in this section to print your first
label.
Connecting the Power
The labelmaker can operate on AC or battery power. To
save power, the labelmaker will automatically turn off
after two minutes of inactivity.
Inserting the Batteries
The labelmaker uses six AA batteries.
To insert the batteries
1. Remove the battery compartment cover. See Figure
2.
Figure 2
2. Insert the batteries following the polarity markings
(+ and –).
3. Replace the battery compartment cover.
!
Remove the batteries if the labelmaker will not
be used for a long period of time.
Connecting the Power Adapter
Connecting the power adapter to the labelmaker
disconnects the batteries as a power source.
To connect the power adapter
1. Plug the power adapter into the power connector
on the top, left side of the labelmaker.
2. Plug the other end of the power adapter into a
power outlet.
Inserting the Tape Cassette
Your labelmaker comes with one D1 tape cassette. Visit
www.dymo.com for information about purchasing
additional tape cassettes.
To insert the tape cassette
1. Press and release the tape cassette cover to open
the tape compartment. See Figure 3.
3