Administer Receivers, Channels Und Groups, Menu Administration; Name Receivers, Channels And Groups, Menu Receiver, Channel And Group Name - Selve commeo Multi Send Notice

GB Programming

8.4. Administer receivers, channels und groups, menu Administration

In the menu Administration it is possible to give receivers, channels and groups clear
names for a better differentiation. Also the target positions for the switching times can
be determined in this menu as well as the channel assignment for the groups can be
organised.
8.4.1. Name receivers, channels and groups, menu Receiver, channel and group
name
In the menu Receiver, channel and group name it is possible to give receivers,
channels and groups names for a better distinction. The receiver name will also be
shown at a message of a receiver. Please give a clear name for the receiver in order to
distinguish them better later. The names for the groups and channels will later also be
shown at the selection of groups and channels to ease the manual operation. Depend-
ing on the characters, it is possible to use up to 18 characters for a name.
The menu Receiver, channel or group name is selected. In
this example we have a channel name. The receiver, channel or
group selection is shown.
With the buttons
or group that has to be renamed. When you name receivers,
the selected receivers will move shortly to ease the selection.
With the button
istration without saving.
With the button
you can enter new names for the selected receivers, channels
or groups.
You will get into the writing menu. In this example, it is the
channel name channel 1.
With the buttons
you want to enter into the text field. The first letter will automat-
ically be in capital letters. Lower and upper case as well as
numbers and special characters can be selected via ABC, abc
and 123. A list with umlaut (ä, ö, ü) will be established when
pushing the button of the selected letter longer. When push-
ing the button shortly the selected letter will be typed into
the text field or lower and upper case as well as numbers and
special characters will be shown. By using the sign
character will be deleted.
With the button
er, channel or group selection without saving.
With the button
into the menu Receiver, channel or group selection.
The modified name will be shown in the list.
and you will chose the receiver, channel
you will get back into the menu Admin-
or you will get into the menu in which
, , and you chose the letter which
you will get back into the menu Receiv-
you will save the name and get back
the last
48