Safety Instructions; Technical Details - M-E CUVEO CR-UPMS300 Mode D'emploi

EN
• In no event must an aggressive cleaning
agent or other chemical solutions be used
since that can affect the casing or impair its
proper functioning.
DISPOSAL
Dispose of the product at the end of its
lifespan in compliance with the valid
statutory provisions.

TECHNICAL DETAILS

Receiving frequency: 433.92 MHz
Operating voltage: 230 V/AC, 50 Hz
Protection class: I
Minimum load: 5 W
Connected load max. 300 W ohmic load;
max. 100 W inductive load, LED 5-40 W
Dimensions (WxHxD): 41 x 41 x 13.5 mm
Operating temperature range: 0 °C to +35 °C
Range (free field): up to 50 m
22

SAFETY INSTRUCTIONS

Do not attempt to repair by yourself!
• Damages resulting from non-compliance
with these operating instructions shall render
the warranty void. We shall not be liable for
secondary damages!
• We are not liable for property damage
or for personal injury caused by improper
handling or non-compliance with the safety
instructions. In such cases, the warranty is
no longer valid!
• Please do not use this product at hospitals or
medical establishments. Even if the product
transmits only very weak radio signals, they
could cause interference with the functioning
of life-preserving systems. The same may
also be valid for other areas.
• The product may only be installed by a
qualified electrician who is familiar with the
relevant regulations (e.g. VDE)! Improper