Jbat1: Clear Cmos (Reset Bios) Jumper - MSI 970A-G43 PLUS Mode D'emploi

JBAT1: Clear CMOS (Reset BIOS) Jumper

There is CMOS memory onboard that is external powered from a battery located on
the motherboard to save system configuration data. If you want to clear the system
configuration, set the jumper to clear the CMOS memory.
Resetting BIOS to default values
1. Power off the computer and unplug the power cord.
2. Use a jumper cap to short JBAT1 for about 5-10 seconds.
3. Remove the jumper cap from JBAT1.
4. Plug the power cord and power on the computer.
Keep Data
(default)
Clear CMOS/
Reset BIOS
Overview of Components
17