Nuova Simonelli MicroBar Manuel D'instructions page 61

NOTE: Use at least 4 litres (1.06 gal) of solu-
tion, otherwise it will be necessary to
restart the cycle.
• Wait at least 10 minutes.
• At the end of this time, the display will read:
• Press the ENTER key and the machine will
begin a rinse cycle, sucking up the water
from the tank and expelling it from the nozzle.
This process will last as long as there is
water in the tank.
• At the end of the rinsing process, the
machine will display the following mes-
sages:
• Refill the tank (without switch off the
machine) and the display will read:
Wait a few minutes for the machine to heat up;
at the end of this time, it will be set to Machine
Ready mode.
58
WARNING
You may notice drops of water and steam
coming from the hot water nozzle during the
heating stage.
WARNING
We advise using the steam dispensing func-
tion for a few minutes at the end of each de-
scaling cycle.