Smart Card - Nuova Simonelli MicroBar Manuel D'instructions

go back to the main menu and to confirm the
number of deliveries programmed.
The ENTER key is disabled.
19. COFFEE TEMPERAT.
Press the ENTER key to access the sub-
menu.
This allow you to program the tempera-
ture of the coffee heater.
The arrow keys ▲▼ increase/decrease the
temperature of the coffee heater.
La temperatura massima impostabile è 105°C
(221°F).
Press the RESET key to exit the submenu and
go back to the main menu and to confirm the
temperature programmed.
The ENTER key is disabled.
20. STEAM TEMPERAT.
Premendo il tasto ENTER è possibile
entrare nel sottomenù.
This allow you to program the tempera-
ture of the steam boiler.
The arrow keys ▲▼ increase/decrease the
temperature of the steam boiler.
La temperatura massima impostabile è 130°C
(266°F).
Press the RESET key to exit the submenu and
go back to the main menu and to confirm the
temperature programmed.
The ENTER key is disabled.
21. PASSWORD
Press the ENTER key to access the sub-
menu.
This programmes a new password to
access the functions that can be pro-
grammed in the TECHNICIAN MODE.
Enter a combination of 5 keys (from the 8
keys available on the keyboard) and set
the new required password.
Press the RESET key to quit the submenu and
return to the main menu without confirming the
setting.
Press the ENTER key to confirm the setting.

22. SMART CARD

Press the ENTER key to access the sub-
menu.
This sets the SMART CARD reader to
enabled.
The function is enabled by setting the
parameter to YES.
Press the ▲▼ keys to enable (YES) / deacti-
vate (NO) the SMART CARD reader.
23. WATER FILTER
Press the ENTER key to access the sub-
menu.
This allows you to program the number of
litres of water to be delivered for the dis-
play of the message clean water filter.
The arrow keys ▲▼ increase/decrease the
number of litres of water delivered for the dis-
play of the message clean water filter.
Press the RESET key to exit the submenu and
go back to the main menu and to confirm the
number of litres programmed.
The ENTER key is disabled.
24. DE-SCALING
(Microbar version
with Tank only)
Press the ENTER key to access the sub-
menu.
This performs an automatic de-scaling
cycle on the machine's water heater
tanks.
When the following message appears:
Press the RESET key to return to the previous
menu; press the ENTER key to start the de-
scaling cycle.
OPERATION:
• Before starting the de-scaling cycle, fill the
tank with a solution of water and de-scaling
product.
NOTE: Use at least 2 litres (0.53 gal) of solu-
tion, otherwise it will be necessary to
restart the cycle.
• When the following message appears:
• Press the ENTER key;
• The machine will begin to suck up the solu-
tion from the tank and at the same time, to
expel hot water from the nozzle.
When the solution in the tank has been used
up, the machine will display the following
messages:
• Rinse out the tank and refill it with clean
water (without switch off the machine).
57