Speakerphone Function
cAUTION!
❐ Setting the volume too high may cause permanent damage to your hear-
ing! Do not hold the loudspeaker to your ear after switching on the speak-
erphone function!
• When you have accepted a call, you can switch the loudspeaker (speaker-
phone function) on and off again. Use the
Loudspeaker on or off.
Muting
You can mute the receiver and the microphone if you do not want the per-
son on the other end of the line to hear you.
• During the phone call, select Option Mute (key 7) on or off.
holding a call
During a phone call, you can make or receive another call if this function is
supported by your mobile service provider.
• To accept an incoming call during a phone call, press the key. The first
phone connection is then automatically put on hold.
• Press the
• To make another call during a phone call, simply enter the phone number
and press the key twice in succession (see the "Making Calls" section) or
use the phonebook (see the "Accessing the Phonebook" section). You can
also select Option New call (key 3) and then enter the number (see
the "Making Calls" section).
• To switch between the call subscribers, select Option Swap.
• You can use the
Diverting a call
You can divert an incoming call to another phone if this function is supported
by your mobile service provider.
1. When your mobile phone rings, press the key.
2. Select Divert, enter the destination phone number and confirm this by
tapping the
key if you want to reject the call.
key to end the connection which is currently activated.
key. The call will then be diverted.
key to select Option and then
59