Bundling The Cables - Sony WEGA KLV-17HR2 Mode D'emploi

5

Bundling the Cables

You can store the cables in the back of the TV.
1
Bundle the cables and pass the cables
through the centre hole.
2
Put the cable cover on the stand by fitting
the claws of the cover with the
corresponding holes on the stand. Then,
push the cover to secure it.
To remove the cable cover, pull the
convex part of the cover towards
you.
• It may not be possible to fasten cables
that are too thick with the cable cover.
• If all the cables cannot be stored inside,
leave some of them hanging down on
both sides of the TV.
Cable
cover
Convex
(continued)
7
Quick Start Guide
GB