Commissioning The Device; Risk Of Burns - Weller WMRP Mode D'emploi

8-12
WARNING!
PK Elektronik Vertriebs GmbH, E-Mail: info@pkelektronik.com, Internet: www.pkelektronik.com

5 Commissioning the device

Risk of burns

The soldering iron and desoldering tweezers become hot during
soldering and desoldering.
There is a risk of burns from touching the soldering/desoldering
tips.
Keep the hot soldering iron and desoldering tweezers well
away from flammable objects and do not touch.
1. Carefully unpack the WMRP soldering pencil or WMRT micro
desoldering tweezers.
2. Insert the connector (6) into the power supply socket and lock it
by turning clockwise.
3. WMRP:
Place the soldering iron in the safety WDH 50 tool stand and
ensure that the soldering iron grip (5) is correctly seated against
the magnetic tool holder (1).
WMRT:
Place the tweezers in the WMRTH safety tool stand and ensure
that the hand piece (5) is correctly seated against the magnetic
tool holder (1).
4. Check whether the main supply voltage matches the voltage
indicated on the rating plate.
5. Turn the station power switch to "On" and set the required
temperature on the control.
6. Once the tool has reached the desired temperature, tin the
soldering tip with solder.
WMRP/WMRT