Medel CONNECT CARDIO MB10 Mode D'emploi page 78

The cu does not inflate.
The blood pressure measure-
ments are very high/low.
Stored measured values can
no longer be retrieved from
the memory.
The ECG measurement does
not start even though there is
contact with the skin.
Bluetooth
connection failed.
®
Problem
The device ID does not ap-
pear under "Setting" in the
"IBP ECG" app.
100029_MEDEL CONNECT CARDIO MB10_USER MANUAL_REV.00_20.06.2016.indd 78
The cu line is not correctly
inserted into the device.
The cu is ruptured.
The cu was not attached
correctly.
You moved or talked during
the measurement.
The measurement was ob-
structed by clothing.
Old measured values have
been overwritten by more
recent values as the memory
is full.
Insu cient contact pressure.
Connection problems be-
tween the smartphone/tablet
and the app.
Possible cause
Data transfer problem on ini-
tial connection.
78
Ensure that the cu line is correctly
inserted into the device.
Replace the cu . Contact
Customer Services.
Re-attach the cu .
Do not move or talk during the
measurement.
Ensure that clothing cannot obstruct
the arm cu during the measure-
ment.
Download the stored measured
values to your computer every
so often.
Ensure that the lower electrode
is pressed firmly against the skin.
Switch o the main unit, close the
app and deactivate Bluetooth
your smartphone/tablet. Establish
the connection again.
Solution
Switch o the main unit, close the
app and deactivate Bluetooth
your smartphone/tablet.
Establish the connection again.
08/09/2017 12:16:44
on
®
on
®