Initial Use; Insert The Batteries; Set The Date And Time - Medel CONNECT CARDIO MB10 Mode D'emploi

4. Initial use

4.1 Insert the batteries

1. Slide o the battery compartment lid on the rear of the main unit.
2. Insert four AAA type (LR03) batteries into the battery compartment. Make sure that the batteries are
inserted the correct way round.
3. Then close the battery compartment lid until you see and hear it click into place.
The batteries must be replaced when

4.2 Set the date and time

After inserting the batteries, the date and time must be set.
The device automatically stores all measured values with the date and time.
The date and time must be reset after replacing the batteries.
The following parameters are set one after the other: Year -> Month -> Day -> Hour -> Minute
1. Press and hold the + button on the side for 5 seconds. The year flashes
on the display.
2. Set the year using the +/- buttons on the side (you can select a year between 2015 and 2031). To
confirm the year, press the memory button M.
100029_MEDEL CONNECT CARDIO MB10_USER MANUAL_REV.00_20.06.2016.indd 65
appears on the display.
65
08/09/2017 12:16:41