Taking The Ecg Measurement - Medel CONNECT CARDIO MB10 Mode D'emploi

6.2 Taking the ECG measurement

There are three di erent methods of taking the measurement. Start with measurement method A, "right
index finger–chest". If this method does not deliver measurements, or delivers only unstable measure-
ments ("EE" is frequently displayed), switch to method B "left index finger–chest" and, if necessary,
to method C "left hand–right hand".
The most suitable method/procedure depends on the heart configuration (shape of the heart) of each
individual user. If it is not possible to take stable measurements using a given measurement method,
this could have a harmless cause such as the shape of the heart. However, the cause may also be
an illness or disease.
Measurement method C o ers maximum comfort, but o ers a much lower measurement sta-
bility than methods A or B.
1. Insert the ECG stick cable into the connection for the ECG stick on the main unit.
2. Briefly press the activation switch on the ECG stick to switch on the device.
3. Press and hold the memory button M for 3 seconds to select the desired user memory (
100029_MEDEL CONNECT CARDIO MB10_USER MANUAL_REV.00_20.06.2016.indd 71
71
or ).
08/09/2017 12:16:42