Maintenance And Service - Garland GAS 159 E Manuel D'instructions

8. MAINTENANCE AND SERVICE

Carry out random inspections on the machine to
ensure an efficient use of the machine. For a
complete maintenance take the machine to your
nearest service agent.
Never attempt to carry out any maintenance work
on the machine if the machine is running. Carry out
all maintenance work on a flat surface and on a clear
surface.
Always carry out all the maintenance work with
the machine unplugged from the mains.
Read the instruction manual before carrying out
any maintenance work.
Maintain the machine clean, specially the ventilating
areas of the engine.
Only use original spare parts and accessories for this
machine so as to obtain the best performance from
the machine. These spare parts and accessories can
be found in the official distributors of the brand. The
use of other spare parts and accessories could result
in risks to the end user, people who are nearby and to
the machine.
The removal of the security elements, a poor
maintenance or the substitution of spares and
accessories by non original ones can all cause severe
corporal damages.
8.1. MAINTENANCE AFTER USAGE
Carry out the following maintenance work once
you finish your task to guarantee that the machine
functions correctly next time.
8.1.1. GENERAL CHECKS
Check the cable and ensure that the cable has neither
worn off or has been cut.
8.1.2. CLEANING
Before carrying out any cleaning work, unplug the
machine.
Attention! Always clean the machine after use.
Not cleaning the machine adequately will result
in damages to the machine and the machine will
work less. Wherever possible, clean the machine
immediately after working with it.
Do not clean the engine with water. The electric
engine could stop functioning.
Clean the covers of the machine with a damp cloth.
Do not use petrol, detergents, water or any other liquid
to clean the machine.
8.1.3. CONTROL OF THE ELECTRIC CABLE
Inspect the cable for possible damages. If the cable
is not in a good condition, take the machine to your
nearest service agent.
Do not use the machine if the cable is damaged.
8.1.4. VENTILATION ENGINE CONDUCTS
Eliminate any dirt in the ventilation conducts so
as not damage the engine and avoid the machine
overheating and even burning.
8.1.5. CATCHER
Check the catcher. If it is torn or worn out, substitute.
35/100
English