Residual Risk Factors - Garland GAS 159 E Manuel D'instructions

Do not overload the machine. Use the machine for its
correct usage. If used correctly the machine will do
the desired job.
Do not use this machine if the ¨open¨ and ¨closed¨
switch does not work. Any electric machine that
cannot be controlled by the electric switch is
dangerous and must be repaired.
Look after the machine. Check that all moving parts
are well aligned and that they are not blocked, that
there are no broken pieces or other conditions that
could affect the proper functioning of the machine.
If this machine is damaged, always repair it before
using it again. Most accidents occur because of poor
maintenance.
If the machine vacuums a strange element whilst
working, stop the machine, disconnect the machine
from the mains and examine the machine before
continuing. If you detect any type of damage. Take the
machine to your nearest after sales agent.
Maintain the handles of the machine dry and clean.
Handles that are not clean and dry cause these to
be slippery and a consequent loss of control over the
machine.
Unplug the machine before carrying out any
maintenance work, change of accessories
or before storing the machine.
All these measures ensure that the machine will not
be accidentally started.
If the machine starts vibrating in a strange way,
disconnect the machine and examine it. If you cannot
detect why the machine vibrates, take the machine to
your nearest service dealer. Vibrations are always an
indication of a problem to the machine.
In case of a prolonged stoppage time, unplug the
machine from the mains.
2.6. SERVICE
Take your machine for periodic revision to a qualified
after sales dealer and only use original spare parts
and accessories. This will guarantee that the security
measures of this machine can always be complied
with.

2.7. RESIDUAL RISK FACTORS

Even when the tool is used as prescribed it is not
possible to eliminate all residual risk factors. The
following hazards may arise in connection with the
tool's construction and design:
• Damage to lungs if an effective dust mask is not
worn.
• Damage to hearing if effective hearing protection is
not worn.
• Health defects resulting from vibration emission if
the power tool is being used over longer period
of time or not adequately managed and properly
maintained.
WARNING! This machine produces an electromagnetic
field during operation. This field may under some
circumstances interfere with active or passive medical
implants. To reduce the risk of serious or fatal injury,
we recommend persons with medical implants to
consult their physician and the medical implant
manufacturer before operating this machine.
27/100
English