Air Compressor And Pneumatic Tool Safety - Husky C801H Guide D'utilisation Et D'entretien

Compresseur d'air stationnaire de 80 gallons
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Safety Information (continued)
AIR COMPRESSOR AND
PNEUMATIC TOOL SAFETY
Keep compressors as far from the spraying area as
possible: at least 15 ft. (4.6 m) from the spraying
area and all explosive vapors.
If connected to a circuit protected by fuses, use time-
delay fuses with this product.
Ensure the hose is free of obstructions or snags.
Entangled or snarled hoses can cause loss of
balance or footing, and may become damaged.
Use the air compressor only for its intended use. Do
not alter or modify the unit from the original design
or function. Never weld or drill holes in the air tank.
Never leave a tool unattended with the air hose
attached.
Do not operate this tool if it does not contain a
legible warning label.
Do not continue to use a tool or hose that leaks air or
does not function properly.
Do not attempt to pull or carry the air compressor
by the hose.
Your tool may require more air consumption than
this air compressor is capable of providing.
Never direct a jet of compressed air toward people
or animals.
Protect your lungs. Wear a face or dust mask if the
operation is dusty.
Do not use this air compressor to spray chemicals.
Your lungs can be damaged by inhaling toxic
fumes. A respirator may be necessary in dusty
environments or when spraying paint.
This compressor is equipped with a thermal
overload protector which will shut off the motor if it
becomes overheated.
WARNING: Do not attempt to modify this tool or create
accessories not recommended for use with this tool.
Any such alteration or modification is misuse and could
result in a hazardous condition leading to possible serious
personal injury.
CAUTION: Do not use the compressor in an environment
that is dusty or otherwise contaminated. Using the air
compressor in this type of environment may cause damage
to the unit.
CAUTION: Risk of bursting. Do not adjust the regulator
to result in output pressure greater than the marked
maximum pressure of the attachment. Do not use at
pressure greater than the rated maximum pressure of this
compressor.
CAUTION: To reduce the risk of electric shock, do not
expose the compressor to rain. Store indoors.
4

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

901-032

Table des Matières