Specifications; Monitor Specifications - NEC MultiSync FP2141SB Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Specifications

Monitor
Specifications
Diagonal:
Picture Tube
Viewable Image Size:
Radius:
Video:
Input Signal
Sync:
Separate sync. TTL Level
Analog input:
Display Colors
Horizontal:
Synchronization
Vertical:
Range
Resolutions Supported
Resolution based on horizontal and
vertical frequencies only
Horizontal:
Active Display Area
Vertical:
(Factory Setting)
Active Display Area
(Full Scan)
Power Supply
Monitor:
Current Rating
Monitor + USB Hub:
Dimensions
Weight
Environmental Considerations
Operating Temperature:
Humidity:
Altitude:
Storage Temperature:
Humidity:
Altitude:
MultiSync
®
FP2141SB
Monitor
22 inch/55 cm
20 inch/508 mm
50000 mm
ANALOG 0.7 Vp-p/75 Ohms
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Composite sync. (Negative) (TTL Level)
Sync on Green video (Positive) 0.7Vp-p and sync.
Negative 0.3Vp-p
Unlimited number of Colors
30 kHz to 140 kHz
50 Hz to 160 Hz
640 x 480 @ 50 to 160 Hz
800 x 600 @ 50 to 160 Hz
1024 x 768 @ 50 to 160 Hz
1280 x 1024 @ 50 to 127 Hz
1600 x 1200 @ 50 to 109 Hz .................... NEC-Mitsubishi Electronics Display cites
1800 x 1350 @ 50 to 98 Hz
1800 x 1440 @ 50 to 92 Hz
1856 x 1392 @ 50 to 95 Hz
1920 x 1440 @ 50 to 92 Hz
2048 x 1536 @ 50 to 86 Hz
396 mm/15.6 inches
297 mm/11.7 inches
406 mm/16.0 inches
304.6 mm/12.0 inches
AC 100 – 120 V/220 - 240 V, 50/60 Hz
1.35A @ 100 – 120 V / 0.65A @ 220-240 V
1.5A 100-120V / 0.7A 220-240V
495 mm (W) x 484.5 mm (H) x 471 mm (D)
19.5 inches (W) x 19.1 inches (H) x 18.5 inches (D)
29.3 kg
64.5 lbs
+5°C to +35°C/+41°F to +90°F
10% to 90%
0 ft (0 m) ~ 10,000 ft (3,000 m)
-20°C to +60°C/-4°F to +140°F
10% to 90%
0 ft (0 m) ~ 50,000 ft (15,000 m)
NOTE: Technical specifications are subject to change without notice.
12
Notes
90° deflection, 0.24 mm grille pitch,
medium short persistence phosphor,
aperture grille CRT, G-WARAS coating
Depends on display card used.
Automatically
Automatically
Some systems may not support
all modes listed.
recommended resolution a 85 Hz for
optimal display performance.
Dependent upon signal timing used,
and does not include border area.
Dependent upon signal timing used,
and does not include border area.

Publicité

Table des Matières
loading

Table des Matières