GYS Smart Printer Module Manuel D'utilisation page 7

SAFETY INSTRUCTIONS
This manual contains safety and operating instructions, to be
followed for your safety. Please read it carefully before using
the device for the first time and keep it for future reference.
Read and understand the following safety instructions before
use. Any modification or update that is not specified in the
instructions manual should not be undertaken. The manufacturer
is not liable for any injury or damage due to non-compliance
with the instructions featured in this manual. If there is any issue
or uncertainty, please consult a qualified individual to operate
the equipment correctly. This device may only be used for ticket
printing and/or data transmission within the limits indicated
on the device and manual. The operator must follow the safety
instructions. In case of improper or unsafe use, the manufacturer
cannot be held liable.
Do not use the charger if the mains cable or plug is damaged.
Do not place the unit near a heat source/direct sunlight and
durably high temperatures (above 50 ° C)
This machine must be connected to an earthed socket.
Maintenance :
• Maintenance should only be carried out by a qualified person.
• Warning ! Always disconnect from the mains before performing
maintenance on the device.
• Do not use solvents or other aggressive cleaning products
under any circumstances
• Clean the surfaces of the unit with a dry cloth.
Regulations :
• The Machine is compliant with European directives.
• The declaration of conformity is available on our website.
• Equipment in compliance with British requirements. The Brit-
ish Declaration of Conformity is available on our website (see
home page).
• Equipment in conformity with Moroccan standards.
• The declaration C‫( م‬CMIM) of conformity is available on our
website (see cover page).
Waste management:
• This product should be disposed of at an appropriate recycling
facility. Do not throw away in a household bin..
SMART PRINTER MODULE
EN
7