2
INTRODUCTION
Important Safety Instructions
oxygen is being administrated.
- To disconnect, turn all controls to the off ("O") position, then remove plug from
outlet.
- Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
- The foot control is used to operate the machine. Avoid placing other objects
on the foot control.
- Do not use the machine if it is wet.
- If the LED lamp is damaged or broken, it must be replaced by the
manufacturer or its service agent or a similarly qualifi ed person, in order to
avoid a hazard.
- If the supply cord connected with the foot control is damaged, it must be
replaced by the manufacturer or its service agent or a similarly qualifi ed
person, in order to avoid a hazard.
- This sewing machine is provided with double insulation. Use only identical
replacement parts. See instructions for Servicing of Double-Insulated
Appliances.
SAVE THESE INSTRUCTIONS
For Europe only :
This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards
involved. Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
The noise level under normal operating conditions is less than 75dB(A).
The machine must only be used with foot control of type FC-1902A(110-120V
area) / FC-2902A, FC-2902C, FC-2902D(220-240V area) manufactured by
ZHEJIANG FOUNDER MOTOR CORPORATION LTD. (China)
For outside Europe :
This sewing machine is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the sewing machine by a person responsible for their safety. Children
should be supervised to ensure that they do not play with the sewing machine.
The noise level under normal operating conditions is less than 75dB(A).
The machine must only be used with foot control of type FC-1902A(110-120V
area) / FC-2902A, FC-2902C, FC-2902D(220-240V area) manufactured by
ZHEJIANG FOUNDER MOTOR CORPORATION LTD. (China)
4