Num'axes PIE1051 Guide D'utilisation page 32

8. Setting up the camera
− Mount the camera facing north or south, not east or west as the rising and setting of the sun could
produce false triggers and overexposed images.
− If you're covering a trail, face the camera down or up the trail.
− Clear out any brush or weeds in front of the camera. These can cause false triggers due to
temperature and motions disturbances in front of the camera (especially in windy days).
− Check the power level of the batteries.
− Make sure the memory card is properly inserted and have sufficient available space.
− Verify time and date are correct.
− Make sure to turn the camera ON before leaving (switch in the ON position).
9. Technical specifications
Image sensor
Effective pixels
Day/Night mode
Infrared flash
Memory
Lens
LCD screen
PIR sensor
Capture modes
Photo resolution
Multi-shot
Picture files format
Video resolution
Video length
Video files format
Trigger time
Camera ID
Time-lapse
Cycle recording
Password
Operation power
Battery type
External power
Stand-by current
Stand-by time
Operating temperature
PIE1051 - Indice D – Mars 2022
5 Mega Pixels Colour CMOS
2560 x 1920 pixels
Yes
60 IR LED | Invisible LED | Wavelength: 940 nm
Flash range: 20 m (65 ft.)
SD card | Capacity from 4GB up to 32GB maximum | Class 10 minimum
F=3.0 | FOV=100° | Auto IR-Cut-Remove (at night)
Built-in 2.4" TFT colour screen | RGB | 262k
Adjustable detection sensitivity: High | Medium | Low
Detection range: 20 m (65 ft.)
Detection angle: 100°
Photo | Video | Photo + Video
8MP (3264 x 2448) | 12MP (4032 x 3024) | 24MP (5632 x 4224)
NUM'AXES SIM card: 1 photo per trigger
Other SIM card: programmable from 1 to 5 photos per trigger
JPEG
WVGA (848 x 480) | HD 720p (1280 x 720) | FULL HD 1080p (1920 x 1080)
Programmable from 05 to 59 seconds
MOV
Approx. 0.5 second
Programmable
Programmable
Programmable
Programmable
Batteries: 12V | DC: 12V
8 x AA (alkaline or rechargeable Ni-MH)
12V/2A
0.165mA
Approximately 8 months
-25°C to +60°C
32/104