Software Installation - PowerWalker VI 1000RT LCD Manuel

9. Software Installation

WinPower is UPS monitoring software, featuring user-friendly interface to
monitor and control your UPS. This unique software provides complete power
protection for computer system while power failure. With the software users can
monitor any UPS status on the same LAN. Furthermore, a UPS can provide
security protection for more than one computer on the same LAN at the same
time, such as shutting down system in security, saving application data and
shutting down the UPS when power fails.
Software Installation on your PC:
Connected by USB to a PC or notebook, the Software enables communication between
the UPS and the computer. The UPS software monitors the status of the UPS, shuts
down the system before the UPS is exhausted and can remotely observe the UPS via
the Network (enabling users to manage their system more effectively). Upon AC failure
or UPS battery low, UPS takes all necessary actions without intervention from the
system administrator. In addition to automatic file saving and system shut-down
functions, it can also send warning messages via pager, e-mail etc.
• Use the bundled CD and follow the on-screen instructions to install the software
WinPower.
• After the software is successfully installed, the communication with UPS has been
established and a green icon will appear in the system tray.
• Double-click the icon to use the monitor software (as above).
• You can schedule UPS shutdown/start-up and monitor UPS status through PC.
• Detail instructions please refer to the e-manual in the software.
Check http://www.powerwalker.com/winpower.html
version of monitoring software.
from time to time to get the latest
EN