PowerWalker VI 1000RT LCD Manuel page 21

LCD display functions:
The following table describes the functions of the LCD display.
Table3. Description of LCD display function
No. Description
Input frequency and
voltage
Input plug indicator
Output frequency and
voltage
Output plug indicator
UPS status/user
setting display String
Warning indication
Settings
Battery volume level
display
capacity
Load level
display
Function
Indicate the value of input frequency and voltage
Light on when the input power is at no loss.
Indicate the value of output frequency and
voltage
The UPS has two groups of outlets. The output
plug indicator will light on if there is output
power respectively.
Strings Indicate the UPS status( see Table 4)
Strings Indicate user setting options( see Table 5)
Light on when the UPS is failure or alarm.
Light on when the UPS under settings mode.
Indicate the amount of battery volume
remaining. Each battery volume level bar
indicates a 20% of total battery volume
Indicate the percentage of UPS load capacity
which is being used by the protected
equipment. Each LCD level bar indicates a
20% of the total UPS output capacity.
EN