Configuring Ups For Ebm Numbers; Configuring Green Function - PowerWalker VI 1000RT LCD Manuel

will return to current setting item.
6. Exit Settings mode: Press and hold the Enter button
button for 0.5 second to exit setting mode.

4.4 Configuring UPS for EBM Numbers

To ensure the LCD displays the correct battery volume, configure the UPS for the
correct number of EBMs:
Note: 1 KVA E-model has no EBM,can not configure.
1. Enter settings mode: Press
mode.
2. Select settings items: Press
3. Enter settings item: Press
item.
4. Select setting value: Press the Select button
EBM according to your UPS configuration.
5. Confirm settings: Press and hold the Enter button
return to current setting item.
6. Exit Settings mode: Press and hold the Enter button
button for 0.5 second to exit setting mode.

4.5 Configuring Green Function

Green Function is that when an insignificant amount of load is detected, the UPS
will shut down output automatically on battery mode.
The green function is disabled on default mode and user can configure Green
Function through the display:
1. Enter settings mode:
mode.
2. Select settings items: Press
3. Enter settings item: Press
item.
4. Select setting value: Press the Select button
5. Confirm settings: Press and hold the Enter button
will return to current setting item.
6. Exit Settings mode: Press and hold the Enter button
button for 0.5 second to exit setting mode.
more than 3 seconds to enter setting
to select setting items as "EbM".
more than one second to enter the setting
to select the number of
Press more than 3 seconds to enter setting
to select setting items as "GF".
more than one second to enter the setting
to select "001".
for 3 seconds or
EN
one second, ups will
for 3 seconds or
for one second, ups
for 3 seconds or