Important - Human Touch ht 5320 Manuel D'utilisation Et D'entretien

take a seat
1. Insert your legs into the foot and calf massager
Place your feet all the way into the foot and calf massage
wells. The bottom of your feet and the back of your calves
should be touching the well walls.
2. Adjust the foot and calf massager
While sitting in the chair, use the remote control legs-
up button to raise the foot and calf massager to a
comfortable position.
Do not stand or sit on the foot and calf massager.
humantouch.com
8
Using your Human Touch massage chair is easy.
adjust the foot and calf massager and backrest, and you're ready
for the massage of your choosing. Your Human Touch massage
chair expertly soothes tired muscles from head to toe, using a wide
variety of massage techniques that you control. It's the perfect way
to relax and refresh.
3. (optional) To accommodate longer legs, extend the footrest.
Use your calves to pull the foot and calf massager slightly toward you (an inch or two), then pull up on the footrest extension lever
and hold it. Push gently outward with your feet to extend the foot and calf massager, then release the footrest extension lever.
IMPORTANT: If it is difficult to pull up on the footrest extension lever, or the foot and calf massager does not extend when gentle
pressure is applied with your feet, the foot and calf massager is not in the correct position to release and extend. You must pull
the foot and calf massager toward you an inch or two with your calves before pulling up on the footrest extension lever. Do not
force either the footrest extension lever or the foot and calf massager extension, or you may damage the mechanism.
To return the fully-extended footrest to the default position and continue your massage, use your calves to pull the foot and calf
massager toward you until it locks into position. If the foot and calf massager is only partially extended, you must pull up on the
footrest release lever before pulling the foot and calf massager toward you.
NOTE: To exit the chair, simply use the remote control to fully retract the footrest. If the footrest is extended, it automatically
returns to the default position and locks into place.
4. Adjust the backrest
Use the remote control to adjust the backrest
angle for maximum comfort.
For an easier exit, retract the footrest and return the backrest to a full
upright position before getting out of the chair.
Make sure the area behind/underneath the footrest is clear of any obstructions before retracting the footrest.
Just take a seat,
Footrest
extension lever
9