Human Touch ht 5320 Manuel D'utilisation Et D'entretien page 4

get ready
Unpack the box
Chair
1. Plug it in
Plug the power cord into a grounded 120-volt power source.
2. Power on
Turn the power switch (located on the bottom of
the chair back) to ON.
humantouch.com
Head Pillow
Backrest Pad
6
Your Human Touch massage chair
simple assembly (no tools required). Simply zip
the backrest pad onto the chair, attach the head
pillow, and you're done!
3. Raise the backrest
Use the remote control to raise the backrest to
the upright position.
4. Attach the backrest pad
Attach the backrest pad onto the backrest,
using the two sets of zippers.
Backrest pad
Backrest
5. Attach the head pillow
Attach the head pillow to the top of the backrest
using the hook and loop fasteners.
requires some
7