Install Door Panel - NewAge Products PRO 3.0 Serie Manuel D'installation

Install Side Frames:
Hardware:
4x Hex Bolt
4x Washer
(1/4" x 5/8")
1
Align the side frame with
the bottom tray and
lower into position.
Aligning the mounting holes on the tray, insert and tighten the
2
supplied hex rivet nuts and washers to the side frame. Repeat
to opposite side.

Install Door Panel:

Hardware:
8x Self Tapping Screw
with Plastic Washer
Align the Door Panel
3
with the smaller holes on
each side fame.
Insert and tighten the supplied self tapping screws and
4
plastic washers.
Note:
The door can be installed on either side of the side frames.
(M6)
www.newageproducts.com
5