NewAge Products PRO 3.0 Serie Manuel D'installation page 86

Assembling The Rack (Contd.)
Using a stud finder, locate and mark the center position of the studs on the wall. Ensure
12
they fit the size of your install. Mark a line 4 inches above the floor and another line 71.8in (If
installing the bold 72in Wide Rack) or 79.8in (If installing the Pro 72in Wide Rack) on the wall.
Place a wall hanging bracket (Item 14) just below the top line and mark 2 holes on a stud
13
accordingly.
14
Drill a pilot hole using a 3/16" drill bit.
Note: Pilot hole must bore into 3 inches
14
of solid wood for lag screw to be fully
secured.
68.75"
16in
or.
24in
68.75"
Bold : 71.8 in
Note: Install the 3 wall
Pro: 79.8 in
hanging brackets over a
span of 68.75in as equally
as possible on studs.
4in
11