NewAge Products PRO 3.0 Serie Manuel D'installation page 59

Install Top Shelf:
Hardware:
4x Hex Bolt
4x Washer
(1/4" x 5/8")
Align the top shelf with
5
the holes in the side
frame.
Aligning the mounting holes on the top shelf,
6
insert and tighten the supplied hex rivet nuts
and washers to the side frame. Repeat to
opposite side.
Install Middle Shelf & Parts Shelf:
Hardware:
4x Hex Bolt
4x Washer
(1/4" x 5/8")
Note:
The middle shelf can be
installed in 5in increments up
or down.
Aligning the mounting holes on the middle shelf, insert
7
and tighten the supplied hex rivet nuts and washers to the
side frame. Repeat to opposite side.
6
(M6)
(M6)